Why matte?
Matte is the soft, no-shine finish. Colours print rich but calm, and there's no glare, so your stickers look good from every angle.
- No glare, even in bright light
- Bold colour that still looks premium
- Photographs cleanly for your product images
- Made for labels, seals and packaging
How our matte vinyl compares
Vinyl stickers that last, not paper ones that peel and smudge.
Compared with typical paper-based printable sticker sheets.
For work and for fun
From product labels to planner stickers, print what you need, when you need it.
Professional stickers at home in 3 steps
Step 1: Print
Load the sheet so it prints on the matte side, not the backing. Choose a matte or premium matte paper type and a high-quality mode, then give prints a few minutes to dry.
Step 2: Cut
Cut by hand with scissors or a craft knife, or use print-then-cut on a Cricut or Silhouette with the vinyl or sticker setting. Do a small test cut first, so the blade cuts the sticker but not the backing.
Step 3: Stick
Bend a corner to lift the sticker off the backing, then press it onto a clean, dry surface. Smooth it from the centre out to push out any air bubbles.
Questions? Answered.
Everything you need to know before you print your first sheet.
3 A4 sheets (210 × 297 mm) of the same matte vinyl sticker paper as our full 25-sheet pack.
It's made for inkjet printers, including most Epson, Canon, Brother and HP models. Feed one sheet at a time through the rear or manual tray if your printer has one.
It's water-resistant, so it handles splashes, condensation and the odd spilled coffee. For dishwasher-proof or outdoor stickers, add a clear laminate over the top. A laminate also protects stickers that get handled a lot from scratches.
No. The adhesive is permanent, made to stay put on packaging, products, laptops and bottles.
Yes, and it works best with print-then-cut on Cricut and Silhouette. For a kiss cut, which cuts through the sticker but not the backing, use your machine's vinyl or sticker setting. To cut all the way through, choose a slightly heavier setting. Settings vary between machines and blades, so do a small test cut first.
Yes. You can write on the matte surface by hand, so labels and planner stickers can be filled in after printing.
We dispatch orders within 1 business day from Melbourne. Shipping is free on orders over $100 Australia-wide.
Keep them flat in their packaging, somewhere cool and dry and out of direct sunlight. Heat and humidity can make sheets curl, which makes them harder to feed through your printer.
Try another finish
Sample packs in all three finishes, 3 sheets each.
Matte
Soft, no-glare finish with a clean, premium look.
$5.99